Table of Contents
Advertisement
U s i n g t h e A p p l i c a t i o n P r o g r a m s
To set up call costs:
1. Enter the price unit for calculating call cost in the
unit
field. The value must be between 0.01 and 9999999.
2. Enter the 3-character name of currency in the
3. Select a
Credit
status:
Unlimited
4. Enter a credit limit in the
must be between 0.01 and 9999999.
Note: The estimated value shown in the Remaining
credit field is for your reference only. The real cost of
calling may vary depending on the service provider the
call is made through.
5. Tap Done.
6. Enter your PIN 2 code and then tap Done.
Note: The PIN2 is the second PIN code. Its main use is
in controlling restricted services. For example, call time
limits and restricted phone numbers.
• If the PIN2 code is incorrectly entered three times
consecutively, it will be locked. To unlock it, you will need to
enter the PUK2 code, which you obtain from your network
operator.
• When no more charging units or currency units are left, calls
may only be possible to the official emergency number
programmed into the device.
56
Price per
Currency
or Limited.
Remaining credit
field. The value
If the
Credit status
of credit left, the message "Low credit" will appear on the screen.
If "Credit expired" appears, you can not make any chargeable
calls.
field.
Note: For the availability and more information about
the Call meter function, please consult your network
service provider.
Call Waiting
If there is an incoming call when you are in the middle of another
call and the call waiting function is enabled, the screen will
display the number (if available) of the incoming call and call
waiting message to alert you.
1. After
Call waiting
status of your call waiting setting. This will take a few
seconds.
2. Select from the following options:
• On: Enable call waiting.
• Off: Disable call waiting.
3. Tap
Done
to exit.
Calling Cards
You can use this option to set up the device for use with your
calling cards.
1. Tap the
New
button to add a new calling card.
2. Enter necessary information and then tap the
is set to
Limited
and there is only 30 seconds
is selected, the device will inquire the
Done
button.
Advertisement
Table of Contents
