Using this Guide
The wireless phone described in this guide is approved for use in TDMA/AMPS
networks.
A number of features included in this guide are called Network Services. They
are special services provided by wireless service providers. Before you can take
advantage of any of these Network Services, you must subscribe to the
service(s) from your home service provider and obtain instructions for their
use.
Disclaimer
It's possible that you may not be able to activate your phone on all wireless
systems. Please see your service provider for details.
4
2. Getting Connected
You're battery should be charged before you activate your new phone. This
section will help familiarize you on how, and when, to charge your battery.
Attaching your battery
Simply place the battery in the grooves on the back of your phone. Then slide
the battery upward until it clicks.
Note: Use only those batteries approved by the phone manufacturer and
recharge your battery only with the chargers approved by the manufacturer.
See "Important Battery Information" on page 8.
Removing the battery
Note: Switch off the phone before removing the battery!
8860 UG version 0.01 3/15/99
Getting Connected
5