Table of Contents
Advertisement
Breaking Bluetooth Connection
1. Tap the
icon in the Main screen and then select
Bluetooth
on the
2. Uncheck the
Bluetooth on
■ Using the Device as a GPRS Modem
Setting up GPRS Modem via Infrared
Connection
Note: The steps below describe the setup procedure
in Windows XP.
1. Make sure that your device is switched on and the
connection mode has been set to
Connection" on page 93).
2. Align the infrared port of your device with that of your PC.
3. On your PC, click the
Start
right-click on
My Computer
4. Click the
Hardware
tab and then click
5. Double-click Modems, and then
Link.
6. In the dialog that appears, click the
tab.
check box and then tap Done.
Modem
(See "Infrared
button on Windows Taskbar,
and select Properties.
Device
Manager.
Standard Modem over IR
Advanced
tab.
G e t t i n g Y o u r D e v i c e C o n n e c t e d a n d S y n c h r o n i z e d
7. Refer to the service provider's setting to enter a command
in the
Extra initialization commands
An example of the command is
Note: APN (Access Point Node) is a setting by your
network service provider that tells how your data
requests should be routed. Consult your network
service provider for the actual APN address.
8. Click the
Start
to, and then
click the
Start
Panel, and select
9. Click
Create a new
10. In the
New Connection Wizard
11. Click
Connect to the Internet
12. Click
Set up my connection manually
13. Click
Connect using a dial-up modem
14. In the dialog that follows, click to choose
over IR Link
15. In the dialog that follows, enter a connection name in the
ISP name
box, and then click Next.
16. Enter *99# in
and then click Next.
box, and then click OK.
+cgdcont=1,"ip", "APN"
button on Windows Taskbar, select
Show all
connections. Alternatively, you can
button on Windows Taskbar, go to
Network
Connections.
connection.
dialog, click Next.
and then Next.
and then Next.
and then Next.
and then click Next.
Phone number
box in the dialog that follows
Connect
Control
Standard Modem
95
Advertisement
Table of Contents
