Before You Begin; Specifications - Follett U155 Installation, Operation & Service Manual

Follett ice dispensers enjoy a well-deserved reputation for excellent performance, long-term reliability and outstanding
after-the-sale support. To ensure that this dispenser delivers that same degree of service, we ask that you take a
moment to review this manual before beginning the installation of the dispenser. Should you have any questions or
require technical help at any point, please call our technical service group toll-free, (800) 523-9361 or
(888) 2-FOLLETT, or (610) 252-7301.

Before you begin

• After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If
damage is found, notify the shipper immediately and contact Follett Corporation so that we can help in the filing
of a claim, if necessary.
• Check your paperwork to determine which model you have. Follett model numbers are designed to provide
information about the type and capacity of Follett ice dispensing equipment. Following is an explanation of the
different model numbers in the U155 Series.
U155BR5AXR
Important cautions
• Storage area of dispenser contains mechanical, moving parts. Keep hands and arms clear of this area
at all times. If access to this area is required, power to unit must be disconnected first.
• Follett manual load dispensers can accommodate most cube/cubelet ices up to 1" square, or Follett
compressed nugget ice. Crushed, flake, bagged, nugget or congealed ice cannot be used. Use of these
ices can jam dispenser and void warranty. Separate any "waffle-like" sections of cubes before adding
to dispenser. For ice compatibility questions, please call Follett customer service toll-free at (800) 523-
9361 or (888) 2-FOLLETT, or (610) 252-7301.
• Follett recommends use of an activated carbon filter for units equipped with icemakers.
• Ice is slippery. Maintain counters and floors around dispenser in a clean and ice-free condition.
• Ice is food. Follow recommended cleaning instructions to maintain cleanliness of delivered ice.
Electricity
Each icemaker and dispenser requires separate circuit with electrical disconnect within 10 feet (6
meters). Equipment ground required.
ea. icemaker – 20 amps
Model
number
U155, U155X
U155B, U155BX
U155R5A/W, U155R5A/WX
U155BR5A/W, U155BR5A/WX
U155R10A/W, U155R10A/WX
U155BR10A/W, U155BR10A/WX
Welcome to Follett
Ice dispense chute location – R = right side, L = left side
Presence of an X = 10 soda valves
Condenser type – A = air cooled, W = water cooled
Remote icemaker(s) capacity and refrigerant – 5 = 400 lbs (181kg)/day, R22
B = beverage bath equipped. Absence of a B = no integral beverage cooling
N = no beverage rail or valves
Approximate storage capacity in lbs
Dispenser configuration – U = undercounter

Specifications

Standard electrical - 115V, 60 Hz, 1 phase. Max. fuse dispenser – 15 amps;
10 = 800 lbs (363kg)/day, R22
Icemaker
amperage
11.0 amps
11.0 amps
11.0 amps ea (2)
11.0 amps ea (2)
2
Dispenser
amperage
2.4 amps
4.4 amps
2.4 amps
4.4 amps
2.4 amps
4.4 amps