Service Information; Disassembly For Service - Follett U155 Installation, Operation & Service Manual

a
uger motor
(side view)
auger bearing
plate
Disassembly instructions for service requirements only – NOT required for
any cleaning procedure.
Dispense wheel motor removal (see drawing above)
1. Remove drain pan, bin access cover and dispense wheel.
2. Remove stainless steel baffle plate under dispense wheel.
3. Remove two screws holding wheel motor bracket on bin.
4. Lift plate and motor up.
5. Unplug electric quick disconnects from motor.
6. Lift motor and mounting plate out front access opening.
rotating
agitator
baffle
plate
wheel motor
mounting plate
Service
auger
auger tube
front view
12
l
dispense whee
stationery
agitator
wheel
motor