NEC SuperScript 1800 Network User's Manual page 32

4. Click the NetWare tab to bring it to the front.
5. Click Add Q to open the Add Queue dialog box.
6. Select an existing queue, or click Create Q to open the
Create Queue dialog box.
If selecting an existing queue, go to Step 10, otherwise,
continue with the next step.
26 SuperScript 1800 — Network User's Guide
7. From the Create Queue dialog box, type in a name for
your new print queue.
8. Click OK to open the Print Server Mode dialog box.
9. Select Pserver.
10. Click OK and wait for a message box to appear.
11. When asked to add this queue to the print server's list of
service queues, click Yes to return to the Network Interface
dialog box.
12. Click OK to accept the configuration.
Now you can configure the individual Windows, Macintosh,
and UNIX print clients. See the following sections for
instructions.
• "Configuring a Windows 3.1x Client" on page 31.
• "Configuring a Windows 95 or 98 Client" on page 32.
• "Configuring a Windows NT 4.0 Client" on page 33.
• "Configuring a Macintosh Client" on page 34.
• "Configuring a UNIX Client" on page 34