NEC SuperScript 1800 Network User's Manual page 37

Configuring a Windows 3.1x Client
Computers running Windows 3.1x can be configured as a
NetWare print client after the NOS has been configured with
the NEC SuperScript 1800 Network Printer Manager,
NetWare Printer Console, or NetWare Administrator.
To configure a Windows 3.1x client, you must install a printer
driver then assign a printer port.
To install a printer driver:
1. Insert the SuperScript 1800 Solutions CD into the client
computer.
2. Open the Program Manager window.
3. From the File menu, select Run to open the Run dialog
box.
4. Click Browse to open the Browse dialog box.
5. From the Drives drop-down list, select your CD drive.
The directories and files located on the SuperScript 1800
Solutions CD will appear.
6. Select Setup.exe, then click OK to return to the Run
dialog box.
7. Click OK to begin installing the printer software.
When the Select Components dialog box appears, select
the Printer Driver check box then continue to follow the
instructions displayed on your monitor to finish the
install.
To assign a printer port:
1. From the client computer, use a text editor to open
Startnet.bat.
This file should be in the root directory of the client's
hard drive.
2. After the login command line, add the capture command.
Login
Capture /Server= sname /Queue= qname /local= port
Sname is the print server name, qname is the print queue
name, and port is the port number that will be created on
the client.
In a later step, the port will be selected as LPT1.DOS or
LPT2.DOS. So, depending on which port you plan to use,
use 1 for port if using LPT1.DOS, use 2 if using
LPT2.DOS.
3. Save the changes to Startnet.bat, then exit the editor.
4. Restart the client to capture the print queue.
5. From the Program Manager window, double-click Printers
to open the Printers window.
6. From the Installed Printers list, select the printer.
7. Click Connect to open the Connect dialog box.
8. From the Ports list, select LPT1.DOS or LPT2.DOS.
9. Click OK to return to the Printers window.
The printer will be listed in Installed Printers list with
the new port.
10. Click Close to accept the port configuration.
NetWare Networks 31