Removing The Top Cover - NEC Versa E6000 Disassembly Manual

Removing the Top Cover

To remove the Top Cover , first remove the battery (see Removing the Battery), remove the
HDD (see Removing the Hard Disk Drive), remove the Optical Disk Drive (see Removing the
Optical Disk Drive), remove the Keyboard (see Removing the Keyboard) and remove the LCD
Module (see Removing the LCD Module) then perform the following steps:
1. Remove all screws on the bottom of the base unit as shown in Fig. 24
M2.5x9 Silver
Fig. 24 Bottom Cover
NEC Versa E6000/PB Easy Note G5 Disassembly Manual
Page 18