Telephone Lines - Gemini GEM-P1664 Installation Instructions Manual

Control panel/communicator
Hide thumbs Also See for Gemini GEM-P1664:
Table of Contents

Advertisement

Page 16
WI1424A 1/06

TELEPHONE LINES

RING
TIP
RING
TIP
Model 368 Cord
RING
TIP
Connect the Model 368 Cord as follows: 26 (RED = Telco Ring), 27 (GREEN = Telco Tip), 28 (GRAY = Home Ring)
and 29 (BROWN = Home Tip). Insert the modular plug into an approved USOCRJ31X jack (or a CA31A jack for
Canadian installations). The Telco Line is used by the control panel to dial the central station and for downloading.
This line should not be connected to party lines or coin operated telephones. If connected to a line with call waiting,
then call waiting interrupt numbers must be programmed into the CS Telephone Numbers (refer to the GEM-P1664
Programming Instructions).
When communicating to central station and during downloading, the control panel seizes the telephone lines from the
house phones, rendering them inoperative during communication.
Upon completion of central station
communication, the telephone line is restored to the house phones.
X
L
NAPCO Security Systems
GEM-P1664 Installation Instructions

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents