Changing From Metric To Imperial Measurements; Switching On And Weighing; Switching Off; Zero Setting - Miele CS 1418 Operating And Installation Manual

Changing from metric to
imperial measurements
The weight can be displayed in kg or in
lb/oz.
The switch for changing from metric
to imperial measurements is located in
the battery compartment.
^ Use the lever supplied to lift the
scales from the building-in frame.
Only use the lever supplied to lift the
scales from the building-in frame.
Do not use any metal implements as
these could scratch the frame.
^ Remove the scales with both hands
and place them with the underside
facing upwards on a clean, smooth
surface.
^ Open the lid to the battery
compartment.
^ Use a ball-point pen or similar to
push switch
^ Replace the scales in the building-in
frame.
to the right or left.

Switching on and weighing

^ Touch the ON/OFF sensor s.
"8.8.8.8.8" will appear in the display first
of all, followed automatically by "0" (kg)
or "0.00" (lb/oz).
The weighing function is now ready for
use.
^ If possible, the items to be weighed
should be placed in the middle of the
weighing surface.
The weight will appear in the display.

Switching off

^ Touch the s sensor until the display
goes out.
If the weighing function is not used for a
period of two minutes, it will switch itself
off automatically.

Zero setting

You can set the display to zero to add
items to those already weighed.
^ Touch the s sensor.
0 will appear in the display.
You can keep setting the sensor to zero
to weigh additional items.
en-GB
7