Safety Instructions For Installation - Miele CS 1223 Operating And Installation Instruction

Safety instructions for installation

The appliance must only be installed
and connected to the electricity
supply by a suitably qualified and
competent person in strict
accordance with current national
and local safety regulations.
To avoid the risk of damaging the
appliance fit the wall units and
extractor hood before installing it.
~
The veneer or laminate coatings of
worktops (or adjacent kitchen units)
must be treated with 100 °C
heat-resistant adhesive which will not
dissolve or distort.
Any backmoulds must be of
heat-resistant material.
~
This appliance must not be used in
a non-stationary location (e.g. on a
ship).
~
After installation, ensure that the
connection cable is without hindrance
and that there is no mechanical
obstruction which could damage it,
such as a drawer.
~
The appliance may only be installed
above a Miele oven if the worktop is at
least 40 mm thick.
32
~
This appliance must not be installed
over a dishwasher, washing machine,
tumble dryer, refrigerator or freezer.
The high temperatures radiated by the
appliance could damage the appliance
below.
~
The minimum safety distances given
on the following pages must be
observed.
All dimensions in this instruction booklet
are given in mm.