Fitting The Spring Clamps And Spacer Bars - Miele CS 1012 Operating And Installation Instructions

Wooden worktops
^ Position the spring clamps supplied
a and spacer bars b on the top
edge of the cut-out in the positions
marked.
^ Secure the spring clamps and
spacer bars with the 3.5 x 25 mm
screws supplied.

Fitting the spring clamps and spacer bars

Granite and marble worktops
The screws are not required for
granite or marble worktops.
^ Position and secure the spring
clamps a and spacer bars b using
strong, double-sided adhesive
tape c.
37