Changing The Jets - Miele CS 1012 Operating And Installation Instructions

Gas
Table of Contents

Advertisement

Changing the jets

Disconnect the gas hob from the
mains electricity supply. Turn off the
gas supply.
To change the main jets
^ Remove the pan support, burner cap
n and burner head o.
^ Using an M7 socket spanner,
unscrew main jet s.
^ Change the main jet.
To change the small jets
The upper section of the appliance has
to be removed before the small jets can
be changed.
^ Remove burner cap n and burner
head o.
^ Pull the control knobs off.
^ Loosen screws t.
Conversion to another type of gas
^ Carefully remove the upper section of
the appliance. When doing this make
sure you do not also pull out the light
unit for the display
underneath the upper section. To
release the unit, squeeze together
the two clamps
^ Using a small screwdriver, unscrew
small jet u in the gas fitting.
^ Pull out the jet with a pair of pliers.
^ Fit the correct jets securely (see jet
table).
^ Finally, secure the jets against
inadvertent loosening with sealing
wax.
located
.
47

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs 1034

Table of Contents