Extending The Cooling Down Time; Airways Indicator - Miele T 4659 Ci Operating Instructions Manual

Settings menu J
Extending the cooling down
time
The Cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to
handle.
The bar chart shows you the setting.
The machine is delivered with 0 mins
(normal cooling down period) set as
standard.
i
0 min
Set extended cool-down
^ Select the extended time you want (in
2 minute increments) and confirm
your selection with the OK button.
– The programme duration will
increase accordingly.
– You cannot extend the Cooling down
time for the Warm air, Cool air,
Woollens handcare or Smoothing
programmes.
54

Airways indicator

You will have an idea of how often this
should be done after a few drying
programmes.
Off
18 min
Heavy = Clean fluff filters
Normal = Factory default setting
Light
A tick
to show that it has been set.
^ Select the option you want and
Fluff should be removed after drying.
The Clean fluff filters indicator will
remind you to clean the filters when a
certain amount of fluff has collected
in the filters. You can decide at what
level of fluff this reminder should be
given.
= Clean fluff filters
does not appear
only appears when there is
a heavy build-up of fluff
= Clean fluff filters
appears when there is only
a small build-up of fluff
B
will appear beside the option
C Back A
Off
IA
Heavy
confirm your selection with the OK
button.
H