External Condensed Water Outlet; Pulling Out The Drain Hose - Miele T 4659 Ci Operating Instructions Manual

External condensed water
outlet
General notes
When drying is in progress, condensed
water is pumped into the condensed
water container through the drain hose
at the back of the dryer. The
condensed water can also be drained
off directly if the machine is installed
near a sink, drain outlet etc. so that the
condensed water container does not
have to be emptied.
Hose length . . . . . . . . . . . . . . . . 1.00 m
Extension hose . . . . . . . . . . . . . . 2.00 m
(Optional accessory)
Maximum delivery head . . . . . . . 1.50 m
Maximum drain hose length . . . . 4.00 m
,
If the on-site water drainage
system is not fitted with a non-return
valve, the one supplied with the
machine must be fitted to prevent
the risk of back-flow. (See
"Installation conditions requiring a
non-return valve").
Maximum delivery head
with non-return valve fitted . . . . . 1.00 m

Pulling out the drain hose

,
Do not pull on the drain hose
and do not stretch it or allow it to
become kinked as it could get
damaged.
^ Unclip the drain hose (1) and (2).
^ Then pull it off connection (3).
^ The lower clip (4) can be opened to
allow you to take the drain hose out
or to feed the mains cable through it.
Installation
45