Installation Site; Building Under A Continous Worktop / In A Kitchen Run - Miele T 4659 Ci Operating Instructions Manual

Installation

Installation site

,
Make sure the dryer door can be
opened without hindrance after
installation.
Building under a continous worktop /
in a kitchen run
This machine is specially designed for
installation under a continuous worktop
run in a fitted kitchen.
N = Niche height (820-930 mm)
It is supplied fitted with a cover plate
instead of a machine lid. The cover
plate is necessary to ensure
electrical safety and must not be
removed.
38
– The slides supplied should be used
to protect the floor from damage
when the machine is pushed into
position or taken out for servicing.
– The electrical socket must be
located in an accessible position
near the machine.
With niche heights of:
– 840 mm, longer screw feet* are
required. They should be set at a
height of approx. 40mm.
– 870/885 mm - 915/930 mm, one or
two height adjustment frames* are
required.
* optional accessory
The machine must not be used
without the front panel in place.
If the kitchen run has a continuous
furniture plinth in place, a gap must
be made for the tumble dryer.