Extending The Cooling Down Time - Miele TDA 150 Operating Instructions Manual

Extending the cooling down
time
The cooling down phase which takes
place before the end of a programme
can be lengthened in two stages if
required. This cools the garments
down even more.
Follow steps (,, ...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
to Finish.
 Press Start and keep it pressed in
whilst carrying out steps -.
 Switch the dryer on.
 Wait until the indicator light for the
Start button lights up constantly . . .
 . . . and then release the Start
button.
 Turn the programme selector to
Cottons Machine iron.
The Empty container indicator light will
flash seven times.
Programmable functions
The option selected will be displayed
by a number which will alternate with
.
 Factory default setting
 The cooling down time will be
extended by five minutes
(the Clean out airways indicator light
will also flash once)
 The cooling down time will be
extended by ten minutes (the Clean
out airways indicator light will also
flash twice)
 Pressing the Start button switches
between the options.
 Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
 Carry out steps -.
 Switch the dryer off after checking.
53