Extending The Cooling Down Time - Miele T 7644 C Operating Instructions Manual

Extending the cooling down
time
The cooling down phase which takes
place before the end of a programme
can be extended by 5 or 10 minutes,
if required. This makes the garments
easier to handle.
The cooling down time can only be ex-
tended for programmes with drying le-
vels.
Follow the steps (A,B,C ...) to pro-
gramme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the Start/Stop button lights up
constantly . . .
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
five times.
– The Low temperature indicator light
will flash seven times briefly.
Programmable functions
A number to show which option is
selected will appear in the display al-
ternating with the letter P.
0 Cooling down time not extended
(factory default setting)
i Cooling down time extended by
five minutes
(the Automatic indicator light will also
flash once).
2 Cooling down time extended by
ten minutes
(the Automatic indicator light will also
flash twice).
E Pressing the Start/Stop button swit-
ches between the options.
F Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^ Carry out steps A to D.
^ Switch the dryer off after step D.
51