Changing The Programme Sequence; Changing A Programme While It Is Running; To Cancel A Programme; To Interrupt A Programme - Miele T 4659 Ci Operating Instructions Manual

Changing the programme sequence

Changing a programme while it
is running
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations). If a programme button is
pressed, Programme cannot be
changed will appear in the display.
You will need to cancel the current
programme before you can select a
new one.

To cancel a programme

^ Press the Start/Stop button.
The items will be cooled down,
depending how long they have been
dried for and the temperature
reached.
Finish will appear in the display if you
press the Start/Stop button again
during the cooling down phase.
To select a new programme:
^ Switch the dryer off with the
I-On/0-Off button.
^ Switch the dryer back on with the
l-On/0-Off button.
^ Select a different programme.

To interrupt a programme

^ Switch the dryer off with the
I-On/0-Off button.
To continue drying
^ Switch the dryer back on with the
l-On/0-Off button.
22
^ The programme will continue as long
as the cooling down phase has not
started.
Adding or removing laundry
after a programme has started
^ Press the Door button.
^ Open the door.
,
Do not touch the back of the
drum when adding or removing
items. The drum could be very hot -
danger of burning.
^ Add or remove items.
^ Close the door.
To continue drying
^ Press the Start/Stop button.
The time left shown in the display may
now vary from the actual drying time.