Anti-Crease - Miele T 284 Operating Instructions Manual

Programmable functions

Anti-crease

If laundry is not removed as soon as
the programme has finished, the
drum will continue to rotate at
intervals for two hours to prevent
creasing.
The anti-crease function
– is activated when the tumble dryer is
delivered. You can shorten the
duration of the anti-crease phase or
deactivate it if wished.
– is used in all programmes except
Woollens handcare.
– should be left activated.
Follow the steps ( , ,
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at Finish.
Press the Start button and keep it
pressed in whilst carrying out steps
- .
Switch the dryer on.
Wait until the Start indicator lamp
lights up constantly . . .
. . . and then release the Start button.
42
The Cool air lamp will flash three times.
– If the Drying lamp is not flashing:
– If the Drying lamp flashes once:
– If the Drying lamp flashes twice:
...) to
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^ Carry out steps
^ Switch the dryer off after checking
Turn the programme selector to
Cottons Normal.
The flashing sequence of the
Drying lamp shows which option is
currently selected.
Anti-crease is deactivated
Anti-crease will last for 1 hour
Anti-crease will last for 2 hours
(factory default setting).
Pressing the Start button switches
between the 3 options.
Switch the dryer off.
the setting as described above.
to .