Altering The Residual Moisture Level In The Minimum Iron Programme - Miele T 284 Operating Instructions Manual

Altering the residual moisture
level in the Minimum iron
programme
The tumble dryer is designed to dry
effectively using as little energy as
possible.
However, if you require the laundry to
be drier or damper, you can reduce
or increase the default residual
moisture in the Minimum iron
programme.
Follow the steps ( , ,
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at Finish.
Press the Start button and keep it
pressed in whilst carrying out steps
- .
Switch the dryer on.
Wait until the Start indicator lamp
lights up constantly . . .
. . . and then release the Start button.
The Cool air lamp will flash twice.
– If the Drying lamp is not flashing:
– If the Drying lamp flashes once: the
...) to
– If the Drying lamp flashes twice:
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^ Carry out steps
^ Switch the dryer off after checking
Programmable functions
Turn the programme selector to
Cottons Normal+.
The flashing sequence of the
Drying lamp shows which option is
currently selected.
the residual moisture level will be
increased and laundry will be
damper.
residual moisture level will remain
on the standard setting (factory
default setting).
the residual moisture level will be
reduced and laundry will be drier.
Pressing the Start button switches
between the 3 options.
Switch the dryer off.
the setting as described above.
to .
41