Changing The Programme Sequence; Changing A Programme Once It Has Started; Cancelling A Programme Once It Has Started And Then Selecting A Different; Programme - Miele T 284 Operating Instructions Manual

How to dry correctly
Remove the laundry
^ Press the Door button.
^ Open the door.
^ Remove the laundry.
Check that all items have been
removed from the drum. If items are
left in the dryer, they could be
damaged by overdrying when the
dryer is next used.
^ Switch the dryer off by pressing the
l-On/0-Off button.
^ Clean the fluff filter.
^ Close the door.
Changing the programme
sequence
Changing a programme once it has
started
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
If you try and change a programme the
Finish/Anti-crease light will start
flashing.
You will need to cancel the current
programme before you can select a
new one.
14
Cancelling a programme once it has
started and then selecting a different

programme

^ Turn the programme selector to
Finish.
^ Press the Door button.
^ Close the door.
^ Select another programme and start
it.
Cancelling a programme once it has
started and then removing the
laundry
^ Proceed as described in "Adding or
removing laundry after a programme
has started" below.
^ Switch the dryer off after closing the
door.
Adding or removing laundry after a
programme has started
^ Press the Door button.
^ Open the door.
,
Danger of burning:
Do not touch the back of the drum
when adding or removing items. The
drum and the items can get very hot.
^ Add or remove items as required.
^ Close the door.
^ Press the Start button.