Installation To The Rear, Left Or Right Side Of The Appliance - Miele T 284 Operating Instructions Manual

Calculation example
A Wall pipe, with louvred vent
= 1 x 3.8 m Additional duct
length
B/D 2 Elbows, 90°
= 2 x 0.8 m Additional duct
length
C 0.5 m plastic piping
= 0.5 x 1 m Additional duct
length
E Side connection, left
= 1 m Additional duct length
Effective duct length
Result: A duct diameter of 100 mm is
adequate as the effective duct length is
less than the 20 m specified in Table II.
Installation to the rear, left or
right side of the appliance
At the rear
The dryer is delivered with this
connection open.
^ Fit one of the venting systems
described on the following pages.
Left or right side of the appliance
= 3.8 m
= 1.6 m
= 0.5 m
^ Turn the cover flap anti-clockwise.
= 1.0 m
^ Refit it securely in the rear outlet.
= 6.9 m
^ Fit one of the venting systems
described on the following pages.
Installation - venting
31