Changing the door hinging
Before building the appliance in decide
on the door hinging. If left hand door
hinging is required follow these
^ Open the appliance door and remove
all the freezer drawers.
^ Using a screwdriver, remove all the
spacer pieces a and fit them on the
^ Remove cover a by hand and
remove b using a screwdriver.
^ Loosen the fixing screws c slightly.
^ Pull the door off to the right d.
^ Unscrew the fixing screws c
completely, and loosely screw them
into the holes on the opposite side of
the appliance e.
^ Unscrew and remove screws a.
Do not close up the hinges. You
might hurt yourself.
^ Replace the hinges in their diagonally
opposite corners b.
^ Cover the holes using the plugs