Advertisement
Installation
Aligning the appliance door
The appliance door(s) can be height-
adjusted at the lower hinge plates.
Unscrew the set screw a maximum
of one turn using the Allen key
supplied.
Adjust the height of the hinge pin with
the spanner supplied. The
appliance is delivered with the hinge
pin fully screwed in.
- To raise the door: turn it clockwise.
- To lower the door: turn it anti-
clockwise.
Tighten the set screw . The hinge
pin is fastened again.
11210830-03
Changing the door hinging
The appliance is supplied with left-hand
hinging. If right-hand hinging is
required, the hinges must be changed.
Please note that the hinging must not
be changed if this appliance is going to
be installed side by side with another
refrigeration appliance.
Danger of injury and damage
when changing the door hinging!
There is an increased danger of
injury and damage if the refrigeration
appliance is installed by a single
person.
Always change the door hinging with
the help of a second person.
If a door seal is damaged or has
come out of the groove, the door will
not close properly and cooling
performance will be reduced.
Condensate will build up in the
interior and this can cause a build-up
of ice.
Do not damage the door seals and
ensure that they do not come out of
their groove.
Advertisement
