To Dismantle The Oven Door - Miele H 4112 B Operating And Installation Manual

To dismantle the oven door

The oven door has seals on all sides to
protect it.
If, however, condensate has worked its
way in between the glass panes, the
door can be dismantled in order to
clean in between the panes.
Do not use scouring agents, hard
sponges or brushes or sharp metal
tools to clean glass as these can
scratch the surface. Scratches could
cause the glass to break.
Do not use an oven spray. This will
damage the surface of the
aluminium surrounds.
Ensure that the glass panes are
inserted the correct way round after
cleaning as each side of the pane
has a different coating. Those facing
the oven interior reflect the heat.
Cleaning and care
Always remove the oven door before
dismantling it.
^ Place the door on a protective
surface (e.g. on a table cloth) to
prevent it getting scratched. The
door handle should line up with the
edge of the table. Make sure the
glass lies flat and does not get
broken during cleaning.
^ Unscrew the Torx screws, and
remove the guides, trim and seal.
41