To Dismantle The Oven Door - Miele H 4312 B Operating And Installation Instructions

To dismantle the oven door

The oven door has seals on all sides to
protect it.
If, however, condensate has worked its
way in between the glass panes, the
door can be dismantled in order to
clean in between the panes.
Do not use scouring agents, hard
sponges or brushes or sharp metal
tools to clean glass as these can
scratch the surface. Scratches can
also cause the glass to break.
Do not use an oven spray. This will
damage the surface of the
aluminium surrounds.
Ensure that the glass panes are
inserted the correct way round after
cleaning, as each side of the pane
has a different coating. Those facing
the oven interior reflect the heat.
To avoid the risk of breakage, it is
advisable to place the panes on a
table protected by a soft cloth (e.g.
a thick table cloth or a towel).
Cleaning and care
Always remove the oven door before
dismantling it.
^ Place the door on a protective
surface (e.g. on a table cloth or
towel) to prevent it getting scratched.
The door handle should just
overhang along the edge of the table
so that the glass lies flat to prevent it
from getting broken during cleaning.
^ Unscrew the Torx screws, and
remove the guides, trim and seal.
^ You can now remove the inner and
middle panes.
41