Miele H 378 B2 Operating Instructions Manual page 40

Roasting with the Roast Probe
Time left display
After a certain time the estimated
residual time (i.e. the time left to run),
appears in the oven display. The actual
core temperature is no longer visible
and cannot be called up.
The residual time is calculated from the
oven temperature selected, the
required core temperature and the
pattern of the increasing core
temperature.
The residual time figure first shown is
an estimate. As the cooking process
continues you may see the time left
figure increasing. This is due to the
electronics checking the core
temperature and readjusting the time
left. This is quite normal.
40
If, when the residual time is displayed:
– the oven or core temperature is
altered,
– or a different oven function is
chosen,
this will cancel all the residual time
information, and the actual temperature
will reappear.
If the oven door is held open for some
time, the residual time will be
recalculated.
Cooking time is completed
automatically.
Shortly before the end of cooking time
the oven heating switches off.
The Energy-save function (as
described under "Oven - use") comes
into action. The time left continues to be
shown in the display. If the "p" button is
pressed, "EC" appears.
If the oven temperature is altered or the
core temperature increased, the oven
heating will switch on again.