Installing With Ubuntu Linux - Adaptec CDP-00277-01-A Installation And User Manual

cp -f /AACRAID/aacraid.ko-PRE_MOD
/lib/modules/2.6.32-5-486/kernel/drivers/scsi/aacraid/aacraid.ko
Debian 64-bit:
cp -f /AACRAID/aacraid.ko
/lib/modules/2.6.32-5-amd64/kernel/drivers/scsi/aacraid/aacraid.ko
6. Remove the USB drive.
7. Install the loadable module:
Debian 32-bit:
insmod /lib/modules/2.6.32-5-486/kernel/drivers/scsi/aacraid/aacraid.ko
Debian 64-bit:
insmod /lib/modules/2.6.32-5-amd64/kernel/drivers/scsi/aacraid/aacraid.ko
8. Press to switch back to the installation screen, then follow the on-screen prompts
CTRL+ALT+F5
to continue the installation.
Note: Do not press Continue at the end of the installation until you complete Step
9!
9. When prompted to reboot the system, press
10. Type the following commands to complete the driver installation:
Debian 32-bit:
cp -f /AACRAID/aacraid.ko-POST_MOD
/target/lib/modules/2.6.32-5-486/kernel/drivers/scsi/aacraid/aacraid.ko
chroot /target
/sbin/depmod -a 2.6.32-5-486
update-initramfs -u -v
exit
Debian 64-bit:
cp -f /AACRAID/aacraid.ko
/target/lib/modules/2.6.32-5-amd64/kernel/drivers/scsi/aacraid/aacraid.ko
chroot /target
/sbin/depmod -a 2.6.32-5-amd64
update-initramfs -u -v
exit
11. Press to switch back to the installation screen, then reboot.
CTRL+ALT+F5
12. Continue with Managing Your Storage Space

Installing with Ubuntu Linux

Note: You will need your Ubuntu Installation CD to complete this task. You must have
root privileges to install the driver image.
To install the Adaptec RAID controller driver while installing Ubuntu Linux:
1. Insert the Ubuntu Installation CD, then restart your computer.
2. When the installation menu appears, select Install Ubuntu Server. Continue the installation until
the "Configure Network" screen appears, then type
3. Insert the USB driver disk, then type the following command to scan for the device:
fdisk -l
Proprietary and Confidential to PMC-Sierra, Inc.
Document No.: CDP-00277-01-A Rev. A, Issue:
Serial Attached SCSI RAID Controllers Installation and User's Guide
to switch to the console.
CTRL+ALT+F2
on page 54.
to switch to the console.
CTRL+ALT+F2
44