Original Image Quality - Triumph Adler DCC 2520 Instruction Handbook Manual

Copy Functions
NOTE: Incorrect copying may occur if the original is not placed correctly.
3 Press [Close].
Exposure Level
Set the copy exposure. The setting items are as follows.
Item
Auto
Manual
1 Press [Quality] and on the next screen
press [Exposure Mode].
2 Select [Auto] or [Manual].
If [Manual] is selected, press [Lighter] or [Darker] to adjust the contrast.
3 Press [Close].

Original Image Quality

Specify the Image Quality based on the original type.
1
Press [Quality] and on the next screen, press [Orig. Image Quality] ([Image Quality]).
2 Select the image quality. For further details on image quality, refer to Setting Image Quality in
Chapter 3 of Operation Guide.
3
Press [Close].
EcoPrint
Set EcoPrint to save toner consumption.
1
Press [Quality] and on the next screen press [EcoPrint].
NOTE: EcoPrint is a common setting to all steps. It may only be configured as the first step.
2
Press [On]. EcoPrint is enabled.
3 Press [Close].
Color Balance Adjust
Adjust the strength of cyan, magenta, yellow, and black to make fine hue adjustments.
1 Press [Quality] and on the next screen press [Color balance] ([Colour balance]).
1-64
Description
Automatically adjusts copy contrast.
Manually adjust the copy contrast.
Ready to Job build.
Place originals then press Start key.
Job Build
Density 4
Exposure
Mode
Off
Color
balance
Basic
( Full-Color
- Step
Text + Photo Off
Orig.Image EcoPrint
Quality
Off Off
Sharp
Adjust Hue
-ness
Edit
Quality
)
1 sided copy-Left
Finished page #: