Offset Mode - Triumph Adler DCC 2520 Instruction Handbook Manual

Offset Mode

Outputs printed copies such that each set is stacked
perpendicular (rotated 90 degrees) to the previous set.
NOTE: Use of this feature requires paper of the same
size must be loaded in the different cassettes with
portrait and landscape orientations.
Only 11 × 8
used with Offset mode.
Follow the steps as below for using Offset mode.
1 Press [Function].
2 Press [Sort/Offset] ([Sort/Group]).
3
Press [On] ([1 set] or [Output each
page]).
4
Use the numeric keys to enter the copy quantity.
5 Place the original and press the Start key. Copying begins.
If the original has been placed on the optional document processor, copying begins automatically.
If the original is placed on the platen, Scan next original(s) is displayed. Place the next original and
press the Start key.
If all original pages have been scanned, press [Scanning finished]. Copying begins.
Copied pages are output to the output tray offset per each set.
", A4, B5 and 16K paper sizes may be
1/2
3
2
1
Original
Ready to copy. (
Sort/Offset
Sort Offset
Sort:Off Off
Sort:On On
Copy Functions
3
2
1
3
2
1
Copy
Full-Color ) Paper Size
Shortcut Back
11×8
100%
1-9