Setting Stapling Error Detection - Triumph Adler DCC 2520 Instruction Handbook Manual

3
Press [Others].
4 Press [ ] or [ ] to select Auto Continue
and press [Change #].
5
Press [On] or [Off].
6
If [On] is pressed, press [+] or [–] to set
the Auto Continue delay time.
7 Press [Close]. The display returns to the Others screen.
8 Press [Close]. The display is returned to the Printer menu screen.

Setting Stapling Error Detection

Set whether to show an error message during stapling when the staple supply is exhausted.
Mode
On
Off
1
Press the Printer key.
2
Press [Printer Menu].
3 Press [Others].
Description
Displays an error message.
Press [GO] to clear the error message and continue printing without stapling.
Press [Cancel] to cancel printing.
No error message is shown and printing continues without stapling.
item.
Paper
Font
Handling
Color Mode
Page Set
Print RAM DISK
Quality Mode
Others
Setting Item Value
Form Feed Time Out 30. Sec.
Resource Protect Permanent
Auto Continue Off
Finishing Error
Printer menu
Auto continue
When error occurs, auto timing for processing can be set.
Off
On
Printer menu - Others
item.
Paper
Font
Handling
Color Mode
Page Set
Print RAM DISK
Quality Mode
Printer Settings
Close
Others
Change # Service
Back
Seconds
(5)
(5)
Close
Others
3-43