Hard Disk Management - Triumph Adler DCC 2520 Instruction Handbook Manual

System Menu

Hard Disk Management

Verify available hard disk space and delete invalid data from the Hard Disk Management screen.
Perform the following steps.
1
Press the System Menu/Counter key.
2 Press [BOX Management] ([Hard Disk
Management]).
3 Use numeric keys to enter the 4 digit management code. The default setting is 2500 for the 25/20
ppm model and 3200 for the 32/25 and 32/32 ppm models.
If the correct code has been entered, the HDD management mode (HDD management) screen will
be displayed.
NOTE: For security, it is recommended to change the management code. For further details, refer
to Changing Management Code on page 7-25.
If the optional security kit has been installed, the management code is 8 digits long. The default
setting is 25002500 for the 25/20 ppm model and 32003200 for the 32/25 and 32/32 ppm models.
4
To verify available hard disk space or total capacity, press [On] below Check Hard Disk Capacity (on
the left side of the screen).
To delete invalid data, press [On] below Delete invalid data (on the right side of the screen).
NOTE: When the optional security kit is installed, Format Hard Disk is displayed. For further details,
refer to the optional security kit Operation Guide.
5 Press [Close].
6
Press [Close]. The display is returned to the System Menu screen.
7-42
m Menu / Counter
Language
Printer MP tray
Default Setting
Document Register
Management Orig. Size
End
Job
Accounting
BOX Check the
Management counter
Print User
Report Adjustment