To disable a controller alarm, see
●
To rescan a controller, see
●
To save your controller configuration, see
●
To set the contreller's default task priority, see
●
Registering New Controllers
Each time you log in to Adaptec Storage Manager, it searches for new controllers in your
storage space. If it detects a new controller, the New Hardware Detected window opens and
prompts you to register it.
To stay informed about Adaptec products and special offers, register your controllers by
clicking Register Now in the New Hardware Detected window.
Follow the on-screen instructions to complete the registration.
Testing a Controller Alarm
Note:
Not all controllers have alarms. Refer to your controller's documentation for more
information.
If you controller has an alarm, that alarm is enabled by default. To test a controller alarm to
ensure that it's working:
1
Ensure that the speakers on your local system aren't muted.
2
In the Enterprise View, select the controller you want.
3
In the menu bar, click Actions, select Alarm actions, then click Test alarm.
The alarm sounds.
4
To stop the test, click OK.
Silencing a Controller Alarm
You can silence the alarm on a controller while you fix the problem.
To silence the alarm, click the Silence button (shown at right) in the main
Adaptec Storage Manager window.
Disabling a Controller Alarm
You can disable the alarm for a selected controller, if required.
Chapter 8: Maintaining Physical Devices
page
91.
page
92.
page
92.
page
92.
91
●