80
Chapter 6: Modifying Your Direct Attached Storage
●
Re-Enabling Power Management for a Logical Drive
To re-enable the power management for a logical drive, repeat the steps in
Disabling Power
Management for a Logical Drive on page
79, selecting Enable during
Step
2.
Showing Devices Under Power Management
You can highlight the physical and logical drives under power management in the Adaptec
Storage Manager GUI. Logical drives are shown in green if power management is enabled.
Physical drives are shown in green if they are powered down (off).
In the menu bar, select View, then click Show Power Management. Adaptec Storage Manager
highlights the devices under power management in the Physical Devices View and Logical
Devices View:
To stop showing devices under power management, select View on the menu bar, then click
Show Power Management again.