Operating System Support For Usb Peripherals - Intergraph InterServe 800 Manual

ISM Server Reset Options on a System Without
Redundant Power Supplies
On an InterServe 800 without redundant power supplies, InterSite Server Monitor (ISM)
software does not support the following Server Reset Options:
u
If the Server Poweroff option is selected, the server reboots.
u
If the Server Powerup option is selected, a 3414 or a 3415 error message and a
description of the error displays in the Window Pane of the LANDesk Server Manager
Console. This error message is expected, and may be ignored.
NOTE You cannot power up a local or remote server which does not contain redundant power
supplies.
u
If the Server Reset option is selected, a 3414 or a 3415 error message and a description of
the error displays in the Windows Pane of the LANDesk Server Manager Console. This
error message is expected, and may be ignored.
Generally, the Warm Boot option will suffice to reboot or reset a remote server. However, if
you wish to use the Server Reset option, you must edit the
file in the system's Windows NT directory. Change the options at the end of the
.
HOBBSRV HDW
Hard Reset
Power Switch
Line Power OK
Auxilliary Power
Remote Temperature Probe
Console Redirection
After editing the
effect. If a powerdown command is issued, a 3401 error message will display, stating that the
server hardware does not support power control.

Operating System Support for USB Peripherals

Your system includes Universal Serial Bus (USB) ports to which you can connect USB
peripherals. Windows NT 4.0 does not currently support USB peripherals. Microsoft will
add support for USB peripherals to a future Windows NT release.
file to appear as follows:
1
0
0
0
1
0
. file, you must reboot the server to make the changes take
HOBBSRV HDW
32\ \
SYSTEM DRIVERS HOBBSRV
3
.
HDW