Input Selection And Av Connections; Input Selection; Input Signal Selection - Toshiba 19AV623D Owner's Manual

Input selection and AV
connections
Defining the INPUT and OUTPUT sockets so that
the television recognises connected equipment.
See page 7 for a clear view of the back
connection recommendations.
Most media recorders and decoders send a
signal through the SCART lead to switch the
television to the correct Input socket.
Alternatively press the external source selection
button until the picture from connected
equipment is shown.

Input selection

Use the input selection if the television does not
switch over automatically.
Pressing a list will appear on screen
showing all stored external equipment. Use
▲ and ▼to highlight and
Model 19/22
Main
TV
1C
2
3
PC
HDMI
Model 26
Main
TV
1C
2
3
4
PC
HDMI 1
HDMI 2
HDMI 3
NOTE: 26AV623D, 26AV633D* series does not
have HDMI 3 Input port
HDMI™ displays equipment connected to Input
HDMI on the back or side of the television. It is
designed for best performance with 1080i high
definition signals.
This specifies the type of signal going into SCART
on the back of the television. Please refer to the
manufacturers instructions for the connected
equipment.
to select.
Check the signal output of the DVD or compatible
device, please select the correct setting for
"SCART input".
30
CONTROLS AND FEATURES

Input signal selection

In the SETUP menu press ▼ to highlight
SCART, then press ► or
SETUP
Country United Kingdom
OSD Language English
Audio Language
English
Audio Language 2nd
English
Channels
SCART
Common Interface
Reset Default
Enter Select
OK RETURN
Model 19/22:
Press ◄ or ► to select from Auto, Mixed,
RGB, Composite, or S-Video.
SCART
SCART S-Video
Select
RETURN
Model 26:
• Use ▲ or ▼ to select SCART 1 and press
◄ or ► to select from Auto, Mixed, RGB,
Composite, or S-Video.
• Use ▲ or ▼ to select SCRAT 2 and press
◄ or ► to select from Auto, Composite,
or S-Video.
SCART
SCART 1 S-Video
SCART 2
Auto
Select Back
RETURN
to select.
Back Exit
EXIT
Back Exit
EXIT
Exit
EXIT