Input Selection And Av Connections; Hdmi1 Audio; Lip Sync Mode; Input Signal Selection - Toshiba 32DB833G COMBI Series Manual

Input Selection and AV Connections

Use the Input Selection feature if the television does not switch over automatically when using an
external device.

HDMI1 Audio

If the connected HDMI source does not sup-
port digital audio, plug the audio cable into PC/
HDMI (AUDIO) on the back of the television
(as shown in the "Connecting an HDMI or DVI
device to the HDMI input" section), then use
the HDMI 1 Audio setting.
Press MENU. Press ◄ or ► to select
SETUP and press
menu.
PICTURE SOUND
Press ▲ or ▼ to select AV connection,
and press to enter the submenu.
Press ▲ or ▼ to select HDMI1 audio,
press ◄ or ► to select Auto, Digital or
Analogue.
HDMI1 audio
Lip Sync
EXT1 input
Edit
NOTE: The Lip Sync function is only available
in HDMI mode.
to enter the sub-
APPLICATIONS PREFERENCES
SETUP
AV connection
Auto
On
AV
Back
RETURN

Lip Sync Mode

This option activates an auto audio/video
display timing adjustment function that allows
HDMI source devices to accurately perform
synchronization automatically.
All of the above HDMI settings require a proper
HDMI source device.
If HDMI source products do not support these
functions, the TV may not work properly when
activating these functions.
NOTE:
• In a non-HDMI signal mode, this
function is not available.
• In your HDMI connection is capable
of 1080p and/or your TV is capable
of refresh rates greater than 60Hz or
supports Deep Colour, you will need
a Category2 cable. Conventional
HDMI/DVI cables may not work
properly with this mode.

Input Signal Selection

You can select source of AV or S-VIDEO from
this function.
In the AV connection menu, press ▲ or
▼ to select EXT1 input.
Press ◄ or ► to select AV or S-VIDEO.
HDMI1 audio
Lip Sync
EXT1 input
Edit
53
AV connection
Auto
On
AV
Back
RETURN