Switching On; Using The Remote Control; Using The Controls - Toshiba 19AV623D Owner's Manual

If the RED LED is unlit check that the mains plug is connected to the power supply. If the picture does
not appear press on the remote control, it may take a few moments.
To put the television into Standby press
The picture may take a few seconds to appear.
To set up the television you will now need to use the on screen menus. Press
to see the menus.
The on-screen menu appears as a list of five topics. As each symbol is selected by pressing ◄ or ►on
the navigation ring on the remote control, its respective options will appear below.
To use the options, press
, ◄ or ► to select the required choice. Follow the on-screen instructions. The functions of each
menu are described in detail throughout the manual.
To alter the volume press –
To alter the programme position press
Press and , , ◄ or ► to control the sound and picture options.
Press to finish.
To select the external input, press
appropriate input source is selected as described on page 30.
Please always refer to the owner's manual of the equipment to be connected for full details.
Please note: Inserting the headphone plug will mute the sound from all speakers.

Switching on

on the remote control. To view the television press

Using the remote control

or on the navigation ring to move up and down through them and use

Using the controls

+.
P .
and then use
16
, or to move through the list until the
SETTING UP
again.
on the remote control