Table of Contents
Advertisement
CONNECTING YOUR TV
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the television.
While all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.
COMMON INTERFACE
The Common Interface is for a Conditional Access
Module (CAM).
Contact a service provider.
The software updating of CI Plus CAM may be
automatically executed. At this time, your
Recording/Reminder programming will be
canceled.
USB port
Media Player / Wireless LAN adaptor ready for a
home network
Switching on
If the RED LED is not lit, check that the mains plug is
connected to the power supply and press
control; it may take a few moments. The GREEN LED will be lit.
To put the television into Standby, press
control. To view the television, press
take a few seconds to appear.
For energy saving:
We recommend that you use the television with the factory
settings. The factory settings are for energy saving.
Unplugging the mains plug will cut energy use to zero for
all televisions. This is recommended when the television is
not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy efficiency cuts energy consumption and thus saves
money by reducing electricity bills.
NOTE: Putting the television into standby mode will reduce
energy consumption, but will still draw some power.
Using the remote control
Press MENU on the remote control to display the menu.
The menu appears as a list of five topics. As each symbol is
C
c
selected by pressing
or
respective options will appear below.
NOTE: The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however, where some items are
not available in a mode, they will appear greyed out.
1
on the remote
1
on the remote
1
again. The picture may
on the remote control, its
ILLUSTRATION SHOWS 42RL833.
Control panel
To use the option, press
move up and down and press
setting. Follow the on-screen instructions. The functions of
each menu are described in detail throughout the manual.
Using the controls and connections
To alter the volume press –
To alter the programme position press
Bb c C
Press MENU and
options.
Press MENU to finish.
The Media Player feature provides access to photo, movie and
music files stored on a USB storage device that is connected
via the USB port or on a network device.
NOTE: The USB socket has limited functionality and Toshiba
can take no responsibility for damage to other connected
equipment.
The USB socket has to be used with the "TOSHIBA Dual Band
WLAN Adaptor WLM-10U2" in order to access a wireless network.
You must use the TOSHIBA Wireless LAN device to ensure
correct operation of this feature. This feature is available only
when the "TOSHIBA Dual Band WLAN Adaptor" is used.
To select an external input, press
input source is selected.
Please always refer to the owner's manual of the equipment to be
connected for full details.
NOTE: Interactive video games that involve shooting a "gun"
at an on-screen target may not work with this TV.
12
Ambient
Light Sensor
ORANGE LED – Programme
timer set (digital only)
RED LED – Programme timer
Active (digital only)
RED LED – Standby
GREEN LED – Power on
B
b
and
on the remote control to
C
c
or
to select your desired
2
+.
b p B
.
to control the sound and picture
o
until the appropriate
Advertisement
Table of Contents
