ZyXEL Communications Comet 3356 User Manual page 38

Command
\K3 Immediately
send break to
remote
\K4 Enter command
mode
\K5 (default) Send break to
remote in
sequence
\N0
\N1
\N2
\N3
\N4
\N5
\V0
\V1
**0
**1
**2
#CID=0
(default)
#CID=1
#CID=2
#CID?
#CID=?
+FCLASS=n
+FAE=n
+FRH=n
+FRM=n
+FRS=n
+FTH=n
+FTM=n
+FTS=n
+FCLASS=n
+FAA=n
+FAXERR
+FBOR
Function
Select normal (speed buffering) mode
Select direct (pass-through) mode
Select reliable link mode
Select auto-reliable mode
Select LAPM error-correction mode
Select NMP error-correction mode
Connect messages are controlled by the command settings
X,W,and S95
Connect messages are displayed in the single line format
Download to flash memory at last sensed line speed
Download to flash memory at 38.4 kbps
Download to flash memory at 57.6 kbps
Disable caller ID
Enable caller ID with formatted presentation
Enable caller ID with unformatted presentation
Retrieve the current Caller ID mode
Return the mode capabilities
Set fax service class, n=0: data mode (default), n=1: Fax Class
1, n=Fax Class 2
Fax/data auto answer; n=0: fax modem only, n=1: fax or data
auto-detection
Receive data with HDLC framing
Receive data
Receive silence
Transmit data with HDLC framing
Transmit data
Stop transmission and wait for n * 10ms
Set fax service class, n=0: data mode (default), n=1: Fax Class
1, n=Fax Class 2
Adaptive answer
Fax error value
Phase C data bit order
Immediately send
break to remote
Send break to
remote in sequence
Send break to
remote in sequence
Immediately send
break to PC
Send break to PC in
sequence
Send break to PC in
sequence
AT Command Set Summaries 31