Profile Protection - ZyXEL Communications U-1496 series User Manual

S50=000 S51=000
S55=000 S56=000
OK
Factory default setting is stored in ROM, ZyXEL presets User Profile 0 the same as the factory
default.
RESET FROM PROFILE
You can reset the modem and load a user profile as the active settings, or you can designate a
user profile as the power-on default profile. This can be done from the panel control of U-1496,
or by issuing commands from your terminal.
On RESET submenu screen, the profile that follows the equal sign '=' means that the profile is
the one that will be loaded upon power-up. This setting also affects the SAVE TO submenu
default profile (see next section).
((MODE-21))
PROFILE 0 ATZ0
PROFILE 1 ATZ1
PROFILE 2 ATZ2
PROFILE 3 ATZ3
FACTORY DEFAULT
Selecting profile n will reset the modem and load user profile n. Profile n is also set as the
power-on profile.
SAVE TO PROFILE
You can save your current settings to one of the four user profiles. If you want to modify one of
the profiles, recall it as the active settings, then use the panel menu or AT command to do
modifications. Save it by using the SAVE TO submenu or AT command. For example, to save to
profile 2, you can issue AT&W2 from the terminal or select the SAVE TO submenu from the LCD
panel, then press the ENTER key on profile 2. On the SAVE TO submenu screen, the profile
accompanying the equal '=' sign is the profile selected in the RESET submenu, i.e., the power-on
default profile, unless the power-on profile is set to factory default, in which case profile 0 is the
SAVE TO default.
((MODE-22))
PROFILE 0 AT&W0Save current settings to user profile 0 (EEPROM).
PROFILE 1 AT&W1Save current settings to user profile 1 (EEPROM).
PROFILE 2 AT&W2Save current settings to user profile 2 (EEPROM).
PROFILE 3 AT&W3Save current settings to user profile 3 (EEPROM).

PROFILE PROTECTION

If S35.6 of profile 0 is set, this file is protected. A save operation using AT&W0 will prompt
supervisory password entry. Using the SAVE TO menu to save to profile 0 will have no effect.
S52=000
S57=000
Reset modem and load user profile 0.
Reset modem and load user profile 1.
Reset modem and load user profile 2.
Reset modem and load user profile 3.
ATZ4 Reset modem and load the factory default profile.
S53=000 S54=000
S58=000 S59=000