Admin Password Configuration; Figure 7-4 Adsl Configuration; Table 7-4 Adsl Configuration - ZyXEL Communications Prestige 630-C series User Manual

Prestige 630-C Series ADSL USB Modem
The following table describes the fields in this screen.
LABEL
Trellis
Handshake Protocol
Wiring Selection
Bit Swapping (No system
reboot needed)
Submit
Reset
7.6

Admin Password Configuration

Click Admin under Password Configuration to change your Prestige's web configurator administrator
password.
7-6

Figure 7-4 ADSL Configuration

Table 7-4 ADSL Configuration

Select Enabled or Disabled to activate or deactivate the Trellis code. It is
enabled by default.
Select an ADSL handshake protocol. The choices are as follows: Autosense-
G.dmt first, Autosense-T1.413 first, G.dmt/G.lite, T1.413, G.dmt, G.lite.
Make a wiring selection for the RJ-11 port. Tip/Ring is the default for the
board without the inner/outer pair relay. The other choices are A/A1 and Auto.
Select Enabled or Disabled to activate or deactivate upstream bit swapping.
Click this button to submit the changes.
Click this button to reset all values to their defaults.
DESCRIPTION
Administrative Privileges