Table 6-2 Wan Configuration Options - ZyXEL Communications Prestige 630-C series User Manual

Prestige 630-C Series ADSL USB Modem
LABEL
Disconnect Timeout
Authentication
Automatic Reconnect
DHCP
DHCP Client Enable
Host Name
Submit
Reset
LABEL
IP address
Subnet Mask
6-4
Table 6-1 WAN Configuration
Enter a time in seconds after which the PPP connection will disconnect if the line
is idle (max: 32767 seconds).
This field sets the authentication protocol used for outgoing calls. Options for this
field are:
Auto – Your Prestige will accept either CHAP or PAP when requested by this
remote node. PAP mode will run first, and then CHAP.
CHAP – accept CHAP only.
PAP – accept PAP only.
Select this check box to maintain PPP connection. If the ISP shuts down the
PPP connection, it will automatically reconnect PPP session.
Select Enabled or Disabled to change the status of the DHCP client.
If your ISP provided a host name, enter it here.
Click this button to submit the changes.
Click this button to reset all values to their defaults.

Table 6-2 WAN Configuration Options

Bridge Mode
N/A
N/A
DESCRIPTION
Router Mode
(PPPoA/PPPoE)
Automatically
assigned by ISP
Automatically
assigned by ISP
Router Mode
(Dynamic IP)
Automatically
assigned by ISP
Automatically
assigned by ISP
Router Mode
(Static IP)
Provided by ISP
Provided by ISP
Basic Configuration