Navigation And Data Entry; Arrow Keys; Enter - Teledyne 4060 Series Instruction, Operating And Maintenance Manual

Series 4060
Screen Modes:
Screen Readout:

4.6.3 Navigation and Data Entry

Note: All menus time out after 15 (fifteen) seconds elapse with
no button presses, the analyzer returns to the ANALYSIS
SCREEN, if parameters have been altered but not saved
(with the ENTER key), the alterations are lost.
Navigation and Data Entry is possible using 2 ARROW KEYS, the
ENTER key, and the ESCAPE key. It is important to read and
understand the MENU STRUCTURE section to fully understand
navigation and data entry.
4.6.3.1 A
RROW
Pressing the ARROW KEYS select menus and modifies values.
1. In the ANALYSIS SCREEN, the ARROW KEYS cause entry
into the MAIN MENU.
2. When the selected option is a function on the MAIN MENU or
any SUB MENU screen, the ARROW KEYS move to the next
lower or upper menu.
3. If the selected option is a MODIFIABLE ITEM (value is
flashing), The ARROW KEYS increment or decrement numeric
values or toggle ON/OFF, YES/NO, or ENABLE/DISABLE
type values.
4. The arrow keys, when pressed simultaneously, are used to
manually ignite the flame after a flame-out condition.

4.6.3.2 ENTER

The ENTER key is used in several context-sensitive ways.
Teledyne Analytical Instruments
particular key it will be typed as
text using all caps. Example: this is
the ENTER key.
Times New Roman 12 pt. italic.
Example: Analysis Mode or Setup
Mode.
Arial Narrow, 12 pt bold.
Example: AUTOCAL.
K
EYS
Operation
47