Expanded Menus - Teledyne 4040 Instruction, Operating And Maintenance Manual

12. TIMING: Low level application specific timing parameters.
Factory set. Do not change these.
13. STANDBY: Removes power to outputs and displays, but
maintains power to internal circuitry.
Any function can be selected at anytime. Just scroll through the
MAIN MENU with the DOWN/UP keys to the appropriate function, and
ENTER it. The analyzer will immediately start that function, unless
password restrictions have been assigned. (Password assignment is
explained in Section 4.6.10).

4.5.2 Expanded menus

An exhaustive list of menu messages is provided as follows.
AUTOCAL
-----------------------
AS:7d12h
AUTO SPAN Disabled
Span in 7
Span in 12 hours
-----------------------
PASSWORD
-----------------------
Enter Password
'T' 'A' 'I'
-----------------------
GAIN ADJUST
-----------------------
GAIN 1
-----------------------
-----------------------
-----------------------
-----------------------
-----------------------
-----------------------
Teledyne Analytical Instruments
days
Password Incorrect
Change Password
Enter New Password
'T' 'A' 'I'
Operation
49