Software Features; Index To Front Panel Menus; Figure 5-1: Samplem - Teledyne 6400A Instruction Manual

TAI Model 6400A SO

5 SOFTWARE FEATURES

This section covers the software features of 6400A which is designed as a computer controlled
instrument. All major operations are controlled from the front panel display and keyboard through
friendly menu. Sample mode is explained for the basic operation of the analyzer including
calibration steps. Advanced software features are covered for experienced users under the Setup
mode offering advanced instrument control capabilities for optimum operation of the instrument.
For installation and initial operation, please see "Section 2 Getting Started".

5.1 Index To Front Panel Menus

The next several pages contain two different styles of indexes that will allow you to navigate the
6400A software menus. The first two pages show a "tree" menu structure to let you see at a glance
where each software feature is located in the menu. The second menu contains a brief description of
each key mnemonic and a reference to the section of the manual that describes its purpose and
function in detail.
Analyzer Operator Manual, 02164, Rev. G
2
Figure 5-1: Sample Menu
5-1