Enabling Front Or Rear Binding Posts - Fluke 5725A Instruction Manual

5725A
Instruction Manual
CURRENT
AMPLIFIER
(A2)
Make sure that the unused connector is neatly secured in the
recessed area of the chassis side, away from the High Voltage
Sense assembly as Figure 6-7 shows. If it is allowed to hang
down, shorting can occur.
8. Reconfiguration is complete. Reinstall the Current Amplifier and High Voltage
9. Reinstall the top cover.
6-16
J222
Figure 6-7. Enabling Front or Rear Binding Posts
Amplifier assemblies, being careful to correctly seat each assembly into the
connector on the Interconnect assembly.
Caution
FRONT OUTPUT
CABLE
SECURE UNUSED
CABLE
REAR OUTPUT
CABLE
aq23f.eps