Opening A Setup File - Fluke NetDAQ 2640A User Manual

2640A/2645A NetDAQ
Users Manual

Opening a Setup File

If NetDAQ Logger is already active, you can load a saved setup into the current
setup by opening a setup file. Before you open a setup file, you must stop logging
on all instruments. Use any of the following methods to open a setup file.
Select Setup | Open Setup to open the Open Setup dialog box. Highlight the
desired setup file from the list of file names, or enter the file name in the File
Name box and click on Open.
If the desired setup file has been opened recently, you can simply select its
name in the Setup menu's list of recently used files.
On Windows 95, if you have created a shortcut for the desired setup file, you
can drag the shortcut from the Desktop into NetDAQ Logger to open the setup
file.
3-12
ds039s.bmp
3-16.