Cobranet Connection (Cobranet Connectors) - Yamaha DME4io-C Owner's Manual

Connecting to an External Device

CobraNet Connection (CobraNet Connectors)

If you install an MY16-C or MY16-CII interface card on a PM5D Digital Mixing Consol and connect it to the
DME Satellite via the CobraNet connectors, you can remotely control the DME Satellite from the PM5D, as well
as transfer audio and word clock signals between them. Refer to the PM5D/PM5D-RH Owner's Manual for more
information on the PM5D's DME Control function.
30
DME8i-C/DME8o-C/DME4io-C Owner's Manual
Ethernet
CobraNet
Ethernet Switching Hub
CobraNet Switching Hub
Hub
MY16-CII MY16-CII
PM5D
NOT E
• You can control multiple DME series units from a PM5D. Specify the same device group for each DME series unit you
want to control.
• If you have connected a PM5D and a DME Satellite via CobraNet and are controlling the DME Satellite from the PM5D,
you must specify a value of 2 as the fourth octet of the group master DME Satellite's IP address.
Hub
Hub
DME8i-C
INPUT
PEAK PEAK PEAK
SIGNAL SIGNAL SIGNAL DIGITAL MIXING ENGINE SATELLITE
USB
PEAK PEAK PEAK
SIGNAL SIGNAL SIGNAL
INPUT
DME8i-C
INPUT
PEAK PEAK PEAK
SIGNAL SIGNAL SIGNAL DIGITAL MIXING ENGINE SATELLITE
USB
PEAK PEAK PEAK
SIGNAL SIGNAL SIGNAL
INPUT
DME8o-C
DME8o-C
DME4io-C
DME4io-C